“Profi Gold” – synthetic ceramic for layering frameworks made of Profi Press and for frameworks made of precious and non-precious alloys
Advantages: exact Vita A1-D4 shade matching, easy to work, low shrinkage, an affordable price
Ceramics mass correspondence table Profi Gold
| A1 | A2 | A3 | A3.5 | A4 | B1 | B2 | B3 | B4 | C1 | C2 | C3 | C4 | D2 | D3 | D4 | |
| Dentin | A1 | A2 | A3 | A3.5 | A4 | B1 | B2 | B3 | B4 | C1 | C2 | C3 | C4 | D2 | D3 | D4 |
| Opal- schneide |
OS1 | OS1 | OS2 | OS2 | OS3 | OS4 | OS2 | OS2 | OS2 | OS3 | OS2 | OS2 | OS3 | OS3 | OS2 | OS2 |
Transpa: Neutral , Clear, Blue, Brown-grey, Orange-grey
Impulse: Opal Effect white, Opal Effect blue, Occlusal Dentin Orange, Mamelon light
Bleach: Opaquer, Dentin, Schneide
Correctur: Correctur
Profi Line ceramics baking table Profi Gold
| T | B | S | t↑ | H | V1 | V2 | |
| First firing of dentin | 770°C | 450°C | 6 min | 45°C | 1 min | 450°C | 769°C |
| Second firing of dentin | 760°C | 450°C | 6 min | 45°C | 1 min | 450°C | 759°C |
| Firing of stains and glazing | 750°C | 450°C | 4 min | 45°C | 1 min | — | — |
| Firing of the correction ceramic | 685°C | 410°C | 5 min | 40°C | 1 min | 410°C | 684°C |
Temperatures can be adjusted if needed (for example temperature of firing of dentin can be raised by 10 °C if surface is too matte).
- T — final temperature
- B — starting temperature
- S — drying time
- t↑ — heating rate
- H — holding time
- V1 — vacuum on
- V2 — vacuum off
Profi Line ceramics baking table Profi Gold on metal
| T | B | S | t↑ | H | V1 | V2 | |
| First firing of opaquer | 830°C | 450°C | 4 min | 55°C | 1 min | 450°C | 829°C |
| Second firing of opaquer | 820°C | 450°C | 4 min | 55°C | 1 min | 450°C | 819°C |
| Margin firing | 810°C | 450°C | 4 min | 45°C | 1 min | 450°C | 809°C |
| First firing of dentin | 770°C | 450°C | 6 min | 45°C | 1 min | 450°C | 769°C |
| Second firing of dentin | 760°C | 450°C | 6 min | 45°C | 1 min | 450°C | 759°C |
| Firing of stains and glazing | 760°C | 450°C | 4 min | 45°C | 1 min | — | — |
| Firing of the correction ceramic | 685°C | 410°C | 5 min | 40°C | 1 min | 410°C | 684°C |
Temperatures can be adjusted if needed (for example temperature of firing of dentin can be raised by 10 °C if surface is too matte).
- T — final temperature
- B — starting temperature
- S — drying time
- t↑ — heating rate
- H — holding time
- V1 — vacuum on
- V2 — vacuum off
Profi Gold ceramics impulse masses
Bleach
Dentin
Dentin
Bleach
schneide
schneide
Transpa
Neutral
Neutral
Transpa
Clear
Clear
Transpa
Orange Grey
Orange Grey
Transpa
Brown Grey
Brown Grey
Transpa
blue
blue
Opal
Effect White
Effect White
Opal
Effect Blue
Effect Blue
Occ. Dentin
Orange
Orange
Mamelon
Light
Light
Gingiva
Modifier 1
Modifier 2
Modifier 3
Modifier 4
Modifier 5
Profi Gold Universal Shade/Stains
Deep
White
Crackliner
Yellow
Light yellow
Khaki
Olive
Orange
Mahagony
Grey
Red
Blue
Maroon
A
B
C
D
GL
